Negotiable
The date of payment from buyers deliver within days
Shandong
Long-term effective
2020-04-06 03:01
117
Company Profile
By certification [File Integrity]
Contact：sdxinjihua(Mr.)
Email：
Telephone：
Phone：
Area：Shandong
Address：Shandong
Website：http://www.ammtchina.com/ http://sdxinjihua.gzamax.com/
Product introduction:
AMMT-016 Polyurea special primer is one thin coating primer composed of isocyanate prepolymer, curing agent, environment friendly solvent. Fast drying speed, Can effectively seal the concrete substrate. It can close the moisture and air holes of the concrete base and correct the small defects on the surface of the base, improve the adhesion between the polyurea coating and the concrete substrate, and increase the bonding strength between the concrete base and the polyurea coating.
Features:
●Excellent adhesion
●Good matching
●Low dosage
Application:
Primarily used as a primer for polyurea materials, to achieve a good adhesion of polyurea material. At the same time can be used for special primer to polyurea material steel substrate.
Main performance index:
Colour: Light brown
Mass solid content: ≥35%
Mixing ratio: A:B=1:1(mass)
Specific density: approximately 0.95Kg/L
Standard film thickness and coating rate | |
Wet film thickness（µm/) |
90 |
Dry film thickness (micron / Channel) |
40 |
Theoretical Coverage（㎡/Kg，Each） |
11.7 |
Drying schedule: wet film thickness 90 microns, relative humidity: 50% | |||
Base material temperature |
10℃ |
25℃ |
30℃ |
Finger touch drying time (h) |
2 |
1 |
0.5 |
Walking time interval(h) |
8 |
4 |
3 |
Recoating interval |
|||
Shortest(h) |
8 |
4 |
3 |
Longest(d) |
3 |
3 |
3 |
Mixed service life(20℃, h） |
4 |
||
Construction condition:
Coating substrate temperature: Minimum 5℃maximum of 45℃
Relative humidity below 90%, the substrate surface temperature above the dew point temperature above 3 degrees, temperature and humidity should be measured near the substrate.
Outdoor painting is not allowed in rainy, snowy, foggy or strongly windy days.
Construction method: Using single spraying equipment or brush coating
Non gas spraying |
brush coating |
|
Spray pressure |
8~12MPa |
|
Nozzle diameter |
525 |
Spraying pressure and nozzle size may be adjusted according to appropriate requirements of painting performance.
The primer can be sprayed or brushed by hand. When applying, apply force repeatedly to the surface to be painted, or apply it in a circle, which will help the paint to fully wet the surface and enhance the adhesion of the paint film. At the same time, check carefully to ensure that there are no missing areas.
Tool cleaning: Methyl ethyl ketone
Surface treatment:
After the concrete be completely dryd (newly prepared concrete should be cured for 28 days), the surface should be sanding or shot blasted to remove loose impurities on the surface. Old concrete is used to repair the holes and cracks with putty.
When coating on the surface of concrete, the thickness of the coating film can be 30 ~ 50μm, without being too thick. If the concrete strength is poor, the thickness of the coating film or the number of construction channels can be increased appropriately. The penetration of primer can greatly improve the tensile strength of concrete.
Compatibility:
Next-process compatibility:spray polyurea material
Packaging specifications:
A: 10L iron barrel, B: 20L iron barrel
FAQ
Q1. Do you have your own factory?
--A1: Yes, we have factory in Qingdao City, welcome to visit our factory.
Q2. Which payment term do you accept?
--A2: T/T or LC at sight, it can be negotiable.
Q3. How about the delivery time?
--A3: Usually 15 days after received the deposit payment.
Q4. Why do you choose our company?
--A4: A) We are a notionally recognized high-tech company, with top research capability and technical team
B) We have more experience on the international trade with good faith.
Q5. Can you make the product according to our requirements?
--A5: Yes, we will strictly comply with your requirements, such as colour, curing time, adhesion and etc.
Q6. How can you assure your quality?
A6: We accept factory inspection and also third party inspection before shipment
http://www.ammtchina.com/
